Optical switch

Rugged

Flexibly designable

dynamic

Never TOUCH a running system

Touch-free operations – this is possible with the optical switch from GETT.

The world of technology is subject to rapid changes and requires increasingly high standards for functions and usability – and operating technology is no exception. If touch operations in the form of individual and area capacitive sensors still dominated the market a few years ago, a new type of operating system is now the focus of attention – genuine non-touch operations.

The issue of hygiene and the need to adopt measures to minimize health risks have become more relevant, particularly since the pandemic. We are meeting this need with our optical switch and helping create safe and intuitive human/machine interaction.

A detailed check of the optical switch

How it works

The switch is based on an optical proximity sensor. Compared to its rivals, optical barriers or two-dimensional infra-red fields, it has both a technical and an infrastructural advantage, as only one component is needed.

The switching process takes place in three phases: standby, proximity and activation. The relevant switch action is signaled on the switch’s surface using different levels of brightness and/or the color that you wish. They can be individually adapted using special configuration software. The distance for the thresholds can be configured in line with customers’ wishes too. They can be up to 150 mm. The actual switching process takes place 20 mm away from the switch’s surface.

An activation and switch-off time of 100 ms provides safe and precise switching operations. This prevents any activation by people walking past, for example. Are 100 ms too short or too long for you? Customers can adapt the switching times individually too.

The design

The optical switch is a component for insertion.

The diameter of the switch’s head measures 30 mm. The actual function window in the middle of the surface measures 5 mm x 7 mm. It is surrounded by seven RGB-LEDs, which allow an individual color selection from 16.7 million colors.

The front panel of the switch’s surface is made of acrylic glass and its diameter measures 24.7 mm. It is printed on the rear. When adapting the print layout, it is essential to ensure that the function window is not affected.

The optical distance sensor is 36.8 mm long, including the switch’s head and thread, a M22x1 thread.

 

The switch uses 9 – 24 V DC power. The flat plug for the power supply is located at the bottom. It has four contact pins, two for the supply voltage and two potential-free contacts, acting as opening and closing switches.

Modifications

The switch and its proximity sensor provide pre-defined thresholds in the standard option. The standard parameters can be easily adjusted at the customer’s PC using configuration software specially developed for the switch, for example:  

  • The colors of the LEDs,
  • Brightness,
  • Functions,
  • Switching distances and
  • Bounce, signal and recovery times

Would you like a real eye-catcher? No problem, because we can modify the shape and design of the optical switch.

Integration

It is necessary to drill a hole with a diameter of 22.3 mm to insert the switch in a supporting component without any torsion. The switch is affixed using a threaded nut, which is included in the delivery package. The complete insertion height is 43 mm.

Because opto- or photoMOS relays are used, it is easy to replace the mechanical switches, as the switch connections behave like normal contacts.

It is also possible to integrate the unit behind a closed surface to meet customers’ needs. It must be transparent so as not to impair its functions. The switch is provided with a complete, double-sided adhesive for the insertion option. Only the function window is excluded.

A combination of several optical switches on a PCB is also possible. The following use case illustrates what this might look like

The benefits of the optical switch at a glance

No mechanical wear and tear. No wear and tear are caused, as the operating technology does not require any direct mechanical action. The same applies to the switching process itself, as it is not mechanical either.

Absolutely hygienic. No contamination with dirt or germs is possible because there is no contact interaction with the operating element. Any spread of viruses, bacteria and germs on the switch’s surface is minimized too. You can then protect yourself and society from possible sicknesses.

Reliable activation. Regardless of whether you have your hands full, are wearing gloves or your hands are dirty, the state of the object to be reflected is irrelevant, as the sensor system is based on reflection and detection. 

Who benefits from the optical switch

We are clearly focusing on hygiene and multi-functionality for operations and controls with our optical switch.

Laboratories, operating rooms and clean rooms are classic usage areas. Hygiene standards are enormously high here. The optical sensor meets them in each case, as it prevents any touch and therefore contamination and multiplication of germs. Doors and receptacle lids, for example, can be operated without any touch. Switching on lights is also a common scenario. The same applies to use in public institutions.

The front of the optical switch in its standard design meets IP65 protection standards. It is less prone to failure than capacitive switches as regards EMC. Even dust and dirt sticking to the function window do not adversely affect its functions. It is therefore very suitable for use in an industrial environment too.

  • Variable illumination color
  • Non-contact, contamination-free activation possible
  • Operation e.g. also with gloves
  • Very good EMC properties
  • Detection of proximity
  • Variable triggering distance
  • Wipeable in functional mode (configurable)
  • Equipment and apparatus engineering for all applications
  • aerospace & aviation
  • Industry & production facilities
  • Hygienic sensitive areas
  • Embedded Systems
  • Outdoor areas like Building automation, security technology
  • Outer dimensions: 7,3mm x Ø 30mm
  • Housing: Plastic, anthracite
  • Front screen: plastic, clear backside printed
  • Mounting type: thread M22 x1
  • Standard mounting dimension: Ø22,3mm with anti-rotation protection
  • Housing head: round
  • LED illumination colors:
    Standby and approach = blue; trigger = green
  • Illumination type: ring
  • 3 conditions: standby/approach/trigger; visualized by brightness and color
  • distance threshold: approach = approx. 150mm; trigger of approx. 20mm
  • Switching function: normally open contac

We currently have an exclusive offer for the switch as a protected utility model. We can make available a DEV kit for developers and product managers if you request this

Data sheets and downloads for the opticalswitch

Request configuration software here:

  • In what quantities is the optical switch expected to be used?
  • In which types of projects do you want to use the probe?
  • This field is for validation purposes and should be left unchanged.

Suche

Book a free consultation appointment now!

Please choose your region:

Search